Amit még szoktam, az az hogy kikapcsolom a seatbelt bimm-bammolását:
1. turn the key to the ON position (press Start 2 times), foot off the brake
2. cycle the odometer with the trip reset button until the ODO is displayed (not trip A or B )
3. turn the ignition to the LOCK (OFF) position
4. unbuckle the driver's seatbelt if it was buckled.
5. turn the key to the ON position (Press Start 2 times). when the dash lights have come on, press and hold the trip reset button and count a slow 12 seconds. (editor's note, hold it more like 30 sec)
6. while still holding the trip reset button, buckle the driver's side seatbelt.
7. the odometer display should read "b ON" or "b OFF". toggle the beep OFF with the trip reset.
8. the process should be completed when you unbuckle or turn the key off
To turn on again just simply repeat process and make appropriate selection at step 7.
Én nem tudok úgy elindulni, hogy ne kössem be magam, zavar ha nincs rajtam az öv. Csak akkor csináld meg, ha Te is ilyen vagy. Garázsba beálláskor viszont jól jön, hogy nem bimm-bammol.
